12/10/2023 0 Comments Walmart battery finder toolLightweight compared to similar options suitable for transporting to the jobsite.For the cost, you can’t beat the accuracy. A standard 2-by-4 stud is 1½ inches thick, so by measuring 0.75 inches from where the Craftsman indicates the edge of a stud, you’ll find the center. This wall scanner comes with an edge sensor only, but that’s all you need to find a stud. When the sensor detected the edge of a stud, the tool emitted a beep, and the “Edge” light on the front lit up. I ran the Craftsman stud finder over the test wall and then over a standard wall. With this stud finder, I discovered the user has to hold the power button down while scanning-let off the button and the tool goes back to sleep. A beep and a green light on the top lit up to indicate the stud finder was ready to go to work. I put a 9-volt battery in the stud finder and pressed the power button on the side. I didn’t hold out much hope that it would do the job. I was a bit surprised on the first inspection of the Craftsman stud finder it weighs less than 4 ounces, and it’s just 5½ inches long. This basic Craftsman Stud Finder doesn’t come with a lot of bells and whistles, but it gets the job done-and at a very attractive price point. Occasional error message appears on the screen.Accurate to within 1/16 inch for precise detection.Large LCD screen allows users to see measurements easily.Features center and edge detection for added precision while detecting.Versatile option detects both wood and metal stud types.Detects: Wood studs, metal studs, live wires.This appears to be a smart addition, and I look forward to trying it out in the future. Though I didn’t test it, Zircon appears to have updated the backlit screen to indicate the scanning mode based on the color of the display-blue for metal scanning, green when scanning for wood studs, and red when searching for live wires. Note: Since we conducted our tests, a newer model Zircon MultiScanner A250c became available. The Zircon stud finder also did an excellent job of detecting live wires, and while I didn’t have any metal studs to scan for, the stud finder detected steel rebar in a concrete planter. This was without needing to calibrate the tool, but the Zircon does come with an auto-calibration feature if it ever needs to be recalibrated for accuracy. To my amazement, the marks were almost exactly 16 inches apart (within a 1/16 inch). Every time the Zircon tagged the center of a stud, I marked the wall with a pencil. I started at one end of the wall and made an entire scan from side to side. I moved on to testing for repeat accuracy on a regular wall. The red arrow was right on the center of the stud and had I inserted a nail or screw at that point, it would have been dead-on. As soon as I reached the stud’s center, the lines met in a “V,” and a lighted red arrow appeared on the wall above. As I slid the tool across the surface of the test wall, diagonal lines appeared on either side of the digital display to indicate the sensors were moving over a stud. I inserted a 9-volt battery, and the stud finder was ready to go. For those who need to find the center of a stud, either for securely hanging artwork or cutting the drywall along the stud’s centerline, the Zircon Stud Finder shines. At the end of the testing, I added up the scores for each stud finder and used them to categorize the tools based on their best use. I scored each stud finder on accuracy, ease of use, and screen visibility, and I recorded the scores on a rubric. ![]() In addition, to test for live wires, I ran the stud finders (the ones with wire-finding functions) over a section of wall in my home where I know electrical wires run. That allowed me to test the tools on the drywall while noting how accurate they were. ![]() I framed up a test board with several vertical studs and attached standard, ½-inch drywall to the bottom half of the studs. I wanted to create a test situation that was very close to the situation DIYers and pros face when trying to find hidden studs, so I built a facsimile of a stud wall. Users rely on wall stud finders to pinpoint the location of studs concealed beneath the drywall because deciding how to find a stud can be difficult without one of these handy tools. To make this list of the best stud finders, each one of the tools I tested had to be highly accurate. Photo: Glenda Taylor How We Tested the Best Stud Finders
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |